HEAT SHRINKABLE POLYESTER TAPE

Description:

Flat braided tape manufactured from high tenacity polyester yarn. This tape is designed for lacing the end turns of stators. Heat shrinkage of approximately 10% at 350° F holds windings tightly in place following bake cycle. Specifically formulated finish reduces fraying and improves knot holding characteristics.  Also available in low shrinkage version. (Less than 4% at 300° F) Add "LS" to end of part number for this item.  Covered by Breyden Products' UL tested sample BPCCT155.

Temperature Range: To 155°C

Part Number: 60     Finish: Treated     Strength Minimum: 35lbs     Spool Size: 500yd

Nominal Width.062” Nominal Thickness.012”                              Click to View Data Sheet
________________________________________________________________

Part Number: 60-1     Finish: Untreated     Strength Minimum: 35lbs     Spool Size: 500yd
Nominal Width.062” Nominal Thickness.012”                              Click to View Data Sheet
________________________________________________________________

Part Number: 60LS     Finish: Treated/Low Shrink Strength Minimum: 35lbs     Spool Size: 500yd
Nominal Width.062” Nominal Thickness.012”                               Click to View Data Sheet
________________________________________________________________

Part Number: 75     Finish: Treated     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                               Click to View Data Sheet
________________________________________________________________

Part Number: 75-1     Finish: Untreated     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
________________________________________________________________

Part Number: 75LS     Finish: Treated/Low Shrink     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
_________________________________________________________________

Part Number: 100     Finish: Treated     Strength Minimum: 75lbs     Spool Size: 250yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
_________________________________________________________________

Part Number: 100-1     Finish: Untreated     Strength Minimum: 75lbs     Spool Size: 250yd
Nominal Width.100” Nominal Thickness.012”                                 Click to View Data Sheet
_________________________________________________________________

Part Number: 100LS     Finish: Treated/Low Shrink     Strength Minimum: 75lbs   Spool Size: 250yd
 Nominal Width.100” Nominal Thickness.012”                              Click to View Data Sheet
_________________________________________________________________

Part Number: 200     Finish: Treated     Strength Minimum: 110lbs     Spool Size: 250yd
 Nominal Width.200” Nominal Thickness.016”                            Click to View Data Sheet
_________________________________________________________________

Part Number: 200-1     Finish: Untreated     Strength Minimum: 110lbs     Spool Size: 250yd
Nominal Width.200” Nominal Thickness.016”                             Click to View Data Sheet
_________________________________________________________________

Part Number: 200LS     Finish: Treated/Low Shrink     Strength Minimum: 110lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 250     Finish: Treated     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 250-1     Finish: Untreated     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                         Click to View Data Sheet
_________________________________________________________________

Part Number: 250LS     Finish: Treated/Low Shrink     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                        Click to View Data Sheet
_________________________________________________________________

Part Number: 350     Finish: Treated     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 350-1     Finish: Untreated     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                          Click to View Data Sheet
_________________________________________________________________

Part Number: 350LS     Finish: Treated/Low Shrink     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                         Click to View Data Sheet
_________________________________________________________________

Part Number: 500     Finish: Treated     Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                        Click to View Data Sheet
_________________________________________________________________

Part Number: 500-1     Finish: Untreated     Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                       Click to View Data Sheet
_________________________________________________________________

Part Number: 500LS     Finish: Treated/Low Shrink Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                      Click to View Data Sheet