ELECTRICAL PRODUCTS- STATOR LACING TAPES AND CORDS

The following products represent Breyden Products' standard stator lacing materials.  These products are offered in both braided and twisted forms, and in a variety of widths, thickness', diameters, heat shrinkabilities, and twist ratios.  To ensure the widest range of product options available, and to assist our customers with UL testing procedures, we have produced hybrid samples of our polyester/nylon materials (BPCTT155) and Nomex®/fiberglass materials (BPCTT180).

 

 

HEAT SHRINKABLE POLYESTER TAPE

Flat braided tape manufactured from high tenacity polyester yarn. This tape is designed for lacing the end turns of stators. Heat shrinkage of approximately 10% at 350° F holds windings tightly in place following bake cycle. Specifically formulated finish reduces fraying and improves knot holding characteristics.  Also available in low shrinkage version. (Less than 4% at 300° F) Add "LS" to end of part number for this item.  Covered by Breyden Products' UL tested sample BPCCT155.

Temperature Range: To 155°C

Part Number: 60     Finish: Treated     Strength Minimum: 35lbs     Spool Size: 500yd

Nominal Width.062” Nominal Thickness.012”                              Click to View Data Sheet
________________________________________________________________

Part Number: 60-1     Finish: Untreated     Strength Minimum: 35lbs     Spool Size: 500yd
Nominal Width.062” Nominal Thickness.012”                              Click to View Data Sheet
________________________________________________________________

Part Number: 60LS     Finish: Treated/Low Shrink Strength Minimum: 35lbs     Spool Size: 500yd
Nominal Width.062” Nominal Thickness.012”                               Click to View Data Sheet
________________________________________________________________

Part Number: 75     Finish: Treated     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                               Click to View Data Sheet
________________________________________________________________

Part Number: 75-1     Finish: Untreated     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
________________________________________________________________

Part Number: 75LS     Finish: Treated/Low Shrink     Strength Minimum: 50lbs     Spool Size: 500yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
_________________________________________________________________

Part Number: 100     Finish: Treated     Strength Minimum: 75lbs     Spool Size: 250yd
Nominal Width.075” Nominal Thickness.012”                                Click to View Data Sheet
_________________________________________________________________

Part Number: 100-1     Finish: Untreated     Strength Minimum: 75lbs     Spool Size: 250yd
Nominal Width.100” Nominal Thickness.012”                                 Click to View Data Sheet
_________________________________________________________________

Part Number: 100LS     Finish: Treated/Low Shrink     Strength Minimum: 75lbs   Spool Size: 250yd
 Nominal Width.100” Nominal Thickness.012”                              Click to View Data Sheet
_________________________________________________________________

Part Number: 200     Finish: Treated     Strength Minimum: 110lbs     Spool Size: 250yd
 Nominal Width.200” Nominal Thickness.016”                            Click to View Data Sheet
_________________________________________________________________

Part Number: 200-1     Finish: Untreated     Strength Minimum: 110lbs     Spool Size: 250yd
Nominal Width.200” Nominal Thickness.016”                             Click to View Data Sheet
_________________________________________________________________

Part Number: 200LS     Finish: Treated/Low Shrink     Strength Minimum: 110lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 250     Finish: Treated     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 250-1     Finish: Untreated     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                         Click to View Data Sheet
_________________________________________________________________

Part Number: 250LS     Finish: Treated/Low Shrink     Strength Minimum: 225lbs     Spool Size: 250yd
Nominal Width.250” Nominal Thickness.018”                        Click to View Data Sheet
_________________________________________________________________

Part Number: 350     Finish: Treated     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                           Click to View Data Sheet
_________________________________________________________________

Part Number: 350-1     Finish: Untreated     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                          Click to View Data Sheet
_________________________________________________________________

Part Number: 350LS     Finish: Treated/Low Shrink     Strength Minimum: 450lbs     Spool Size: 250yd
Nominal Width.350” Nominal Thickness.020”                         Click to View Data Sheet
_________________________________________________________________

Part Number: 500     Finish: Treated     Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                        Click to View Data Sheet
_________________________________________________________________

Part Number: 500-1     Finish: Untreated     Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                       Click to View Data Sheet
_________________________________________________________________

Part Number: 500LS     Finish: Treated/Low Shrink Strength Minimum: 600lbs     Spool Size: 250ft
Nominal Width.500” Nominal Thickness.020”                      Click to View Data Sheet

 

HEAT SHRINKABLE POLYESTER CORD

Round twisted cord manufactured from high tenacity polyester yarn.  This cord is designed for use in high volume automatic stator lacing applications.  Heat shrinkage of approximately 10% at 350° F holds windings tightly in place following bake cycle.  Specifically formulated finish reduces fraying and improves knot holding characteristics.  Also available in low shrinkage version. (Less than 4% at 300° F) Add "LS" to the end of part number for this item.  Covered by Breyden Products' UL tested sample BPCCT155.

Temperature Range: To 155°C

Part Number: 252     Finish: Treated   Strength Minimum: 40lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1670
 Nominal Diameter .022”                                                      Click to View Data Sheet
________________________________________________________________

Part Number: 252-1     Finish: Untreated   Strength Minimum: 40lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1670
Nominal Diameter .022”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 252LS     Finish: Treated/Low Shrink   Strength Minimum: 40lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1670
Nominal Diameter .022”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 330     Finish: Treated   Strength Minimum: 45lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1150
Nominal Diameter .026”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 330-1     Finish: Untreated   Strength Minimum: 45lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1150
Nominal Diameter .026”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 330LS     Finish: Treated/Low Shrink   Strength Minimum: 45lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1150
Nominal Diameter .026”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 330HT     Finish: Treated/Hi Twist Strength Minimum: 45lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1150
Nominal Diameter .026”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 390     Finish: Treated   Strength Minimum: 60lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1000
Nominal Diameter .030”                                                      Click to View Data Sheet

________________________________________________________________

Part Number: 390-1     Finish: Untreated   Strength Minimum: 60lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1000
Nominal Diameter .030”                                                      Click to View Data Sheet
________________________________________________________________

Part Number: 390LS     Finish: Treated/Low Shrink   Strength Minimum: 60lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 1000
Nominal Diameter .030”                                                      Click to View Data Sheet
________________________________________________________________

Part Number: 504     Finish: Treated   Strength Minimum: 90lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 875
Nominal Diameter .040”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 504-1C     Finish: Untreated   Strength Minimum: 90lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 875
Nominal Diameter .040”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 504LS     Finish: Treated/Low Shrink   Strength Minimum: 90lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 875
Nominal Diameter .040”                                                      Click to View Data Sheet
________________________________________________________________

Part Number: 756     Finish: Treated   Strength Minimum: 135lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 675
Nominal Diameter .050”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 756-1     Finish: Untreated   Strength Minimum: 135lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 675
Nominal Diameter .050”                                                       Click to View Data Sheet
________________________________________________________________

Part Number: 756LS     Finish: Treated/Low Shrink   Strength Minimum: 135lbs     Spool Size: 2lbs.     Approx Yard Per Pounds: 675
Nominal Diameter .050”                                                       Click to View Data Sheet

 

 

POLYESTER DRY SURGE RING ROPE

Round braided rope manufactured from a special type of high tenacity polyester yarn.  This rope is designed for use in VPI (Vacuum Pressure Impregnation) systems.  The special yarn utilized increases varnish absorption.  A special high strength version is available with a high strength aramid fiber cord.  Covered by Breyden Products' UL tested sample BPCCT155.

Temperature Range: To 155°C

POLYESTER ROPE

Part Number: 38P     Nominal Diameter: 3/8"     Strength: 1400lbs     Spool Size: 100ft
                                                                                               Click to View Data Sheet
________________________________________________________________

Part Number: 58P     Nominal Diameter: 5/8"     Strength: 2600lbs     Spool Size: 100ft
                                                                                                Click to View Data Sheet
________________________________________________________________

Part Number: 100P     Nominal Diameter: 1"     Strength: 5000lbs     Spool Size: 100ft
                                                                                                 Click to View Data Sheet

POLYESTER ROPE WITH ARAMID CORE

Part Number: 38PK     Nominal Diameter: 3/8"     Strength: 1500lbs     Spool Size: 100ft
                                                                                                 Click to View Data Sheet
________________________________________________________________

Part Number: 58PK     Nominal Diameter: 5/8"     Strength: 3400lbs     Spool Size: 100ft
                                                                                                 Click to View Data Sheet
________________________________________________________________

Part Number: 100PK     Nominal Diameter: 1"     Strength: 5500lbs     Spool Size: 100ft
                                                                                                Click to View Data Sheet

 

WAXED POLYESTER CORD

Round twisted cord manufactured from high tenacity polyester yarn.  Wax finish reduces fraying and improves knot-holding characteristics.

Temperature Range: To 155°C

Part Number: P64     Nominal Diameter: .035"    Strength: 75lbs    Spool Size: 600yds
Click to View Data Sheet
_________________________________________________________________

Part Number: P96     Nominal Diameter: .050"    Strength: 90lbs    Spool Size: 400yds
Click to View Data Sheet
_________________________________________________________________

Part Number: P128     Nominal Diameter: .060"    Strength: 120lbs    Spool Size: 300yds
Click to View Data Sheet

 

NOMEX CORD

Round twisted cord manufactured from continuous filament Nomex® aramid yarn.  This cord is designed for use in lacing Class H electric motor stators.  Specifically formulated finish reduces fraying and improves knot holding characteristics.  Also available without finish.  Covered by Breyden Products' UL tested sample BPCCT180.

Colors: Natural
Temperature Range:
 To 220°C

Part Number: 5311     Attribute: Coated     Strength: 105lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 420yds
Nominal Diameter .050”                                                           Click to View Data Sheet
__________________________________________________________________

Part Number: 5311-1     Attribute: Uncoated     Strength: 105lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 400yds
Nominal Diameter .050”                                                          Click to View Data Sheet
__________________________________________________________________

Part Number: 5312     Attribute: Coated     Strength: 70lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 630yds
Nominal Diameter .040”                                                          Click to View Data Sheet
__________________________________________________________________

Part Number: 5312-1     Attribute: Uncoated     Strength: 70lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 600yds
Nominal Diameter .040”                                                          Click to View Data Sheet
__________________________________________________________________

Part Number: 5313     Attribute: Coated     Strength: 35lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 1260yds
Nominal Diameter .030”                                                          Click to View Data Sheet
__________________________________________________________________

Part Number: 5313-1     Attribute: Uncoated     Strength: 35lbs.     Standard Spool: 1lb.     Approx. Yards Per Pounds-Nom: 1200yds
Nominal Diameter.030”                                                          Click to View Data Sheet

 

NOMEX TAPE

Flat braided tape manufactured from continuous filament Nomex® aramid yarn.  This tape was designed for lacing end turns of Class H electric motor stators.  Specially formulated finish reduces fraying and improves knot holding characteristics.  Also available without finish.  Covered by Breyden Products' UL tested sample BPCCT180.

Colors: Natural
Temperature Range:
 To 220°C

Part Number: 5500     Attribute: Coated     Strength: 200lbs.     Standard Spool: 250yd
Nominal Width .500" Nominal Thickness .028"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5500-1     Attribute: Uncoated     Strength: 200lbs.     Standard Spool: 250yd
Nominal Width .500" Nominal Thickness .028"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5350     Attribute: Coated     Strength: 150lbs.     Standard Spool: 250yd
Nominal Width .500" Nominal Thickness .028"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5350-1     Attribute: Uncoated     Strength: 150lbs.     Standard Spool: 250yd
Nominal Width .500" Nominal Thickness .028"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5200     Attribute: Coated     Strength: 85lbs.     Standard Spool: 250yd
Nominal Width .200" Nominal Thickness .016"                                                     Click to View Data Sheet
___________________________________________________________________

Part Number: 5200-1     Attribute: UnCoated     Strength: 85lbs.     Standard Spool: 250yd
Nominal Width .200" Nominal Thickness .016"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5100     Attribute: Coated     Strength: 50lbs.     Standard Spool: 250yd
Nominal Width .110" Nominal Thickness .014"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5100-1     Attribute: Uncoated     Strength: 50lbs.     Standard Spool: 250yd
Nominal Width .110" Nominal Thickness .014"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 5070     Attribute: Coated     Strength: 35lbs.     Standard Spool: 250yd
Nominal Width .075" Nominal Thickness .012"                                                     Click to View Data Sheet
__________________________________________________________________

Part Number: 5070-1     Attribute: Uncoated     Strength: 35lbs.     Standard Spool: 250yd
Nominal Width .075" Nominal Thickness .012"                                                       Click to View Data Sheet

 

POLYESTER/GLASS TAPE

Flat braided tape manufactured from high tenacity polyester yarn combined with electrical grade, continuous filament Glass yarn.  This tape was designed for lacing end turns of electric motor stators.  Inclusion of high-temperature Glass provides protection from unanticipated temperature surges.  Also available without finish.

Colors: Natural
Temperature Range:
 To 155°C

Part Number: 6500     Attribute: Coated     Strength: 200lbs.     Standard Spool: 250ft
Nominal Width .500" Nominal Thickness .300"                                                         Click to View Data Sheet
__________________________________________________________________

Part Number: 6500-1     Attribute: Uncoated     Strength: 200lbs.     Standard Spool: 250ft
Nominal Width .500" Nominal Thickness .300"                                                        Click to View Data Sheet
__________________________________________________________________

Part Number: 6300     Attribute: Coated     Strength: 150lbs.     Standard Spool: 250yd
Nominal Width .240" Nominal Thickness .022"                                                       Click to View Data Sheet
__________________________________________________________________

Part Number: 6300-1     Attribute: Uncoated     Strength: 150lbs.     Standard Spool: 250yd
Nominal Width .240" Nominal Thickness .022"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 6200     Attribute: Coated     Strength: 110lbs.     Standard Spool: 250yd
Nominal Width .210" Nominal Thickness .022"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 6200-1     Attribute: Uncoated     Strength: 110lbs.     Standard Spool: 250yd
Nominal Width .210" Nominal Thickness .022"                                                      Click to View Data Sheet
__________________________________________________________________

Part Number: 6100     Attribute: Coated     Strength: 75lbs.     Standard Spool: 250yd
Nominal Width .150" Nominal Thickness .015"                                                     Click to View Data Sheet
__________________________________________________________________

Part Number: 6100-1     Attribute: Uncoated     Strength: 75lbs.     Standard Spool: 250yd
Nominal Width .150" Nominal Thickness .015"                                                      Click to View Data Sheet