Woven Fiberglass Tape
COMMERCIAL GRADE
This tape is manufactured under the highest manufacturing standards utilizing high quality, electrical grade, continuous filament fiberglass yarns which have been twisted and plied. The construction is commonly referred to as medium weave. These tapes are unfinished to allow maximum wet out. Breyden glass tapes are manufactured in an ISO 9001 facility.

Breyden fiberglass tape has been tested by Eltek International, a leading independent test facility servicing the electrical insulation industry, and performed as well or better than many competitive products for resin absorption and retention.

Breyden tapes are primarily used in electrical applications as coil wraps, insulation, mechanical reinforcements and other applications requiring high heat resistance. Breyden glass tapes retain 50% of their tensile strength at 340°C.

All Breyden tapes can be manufactured with a center reference line. Special constructions and widths are available by request. Standard put up is 72 yards for .004" thickness and 36 yards for all other sizes. Other put ups available.

Class 180 Medium Weave
Breyden
Part Number		 Thick-
ness 		Width Min.
Breaking
Strength/ Lbs.		 Datasheets
GT3100MW ET - Med. Weave/Edge Treatment

FIN111 - Med. Weave/Heat Treated

WS - Med. Weave/Weave Set

FIN111ET - Med. Weave/Heat/Edge Treatment

WSET - Med Weave/Set/Edge Treatment
 .003 1.0" 40 View Data Sheet
GT450MW .004" .50" 90 View Data Sheet
GT475MW .004" .75" 135 View Data Sheet
GT4100MW .004" 1.0" 160 View Data Sheet
GT4150MW .004" 1.5" 240 View Data Sheet
GT4200MW .004" 2.0" 280 View Data Sheet
GT550MW .005" .50" 170 View Data Sheet
GT575MW .005" .75" 240 View Data Sheet
GT5100MW .005" 1.0" 315 View Data Sheet
GT5150MW .005" 1.5" 470 View Data Sheet
GT5200MW .005" 2.0" 510 View Data Sheet
GT750MW .007" .50" 170 View Data Sheet
GT775MW .007" .75" 240 View Data Sheet
GT7100MW .007" 1.0" 315 View Data Sheet
GT7150MW .007" 1.5" 470 View Data Sheet
GT7200MW .007" 2.0" 510 View Data Sheet
GT1050MW .010" .50" 280 View Data Sheet
GT1075MW .010" .75" 420 View Data Sheet
GT10100MW .010" 1.0" 560 View Data Sheet
GT10150MW .010" 1.5" 850 View Data Sheet
GT10200MW .010" 2.0" 895 View Data Sheet
Example Part Number: GT550MWWS
 
Treatments Detail
ET  Fiberglass tape edges have been treated with a resin to eliminate fraying and loose fibers 
FIN111 Fiberglass tape has been heat treated to remove yarn sizing.  Heat treatment improves varnish impregnation and eliminates fraying.
WS Fiberglass tape has been weave set.  This process eliminates loose fibers and fraying.  Weave setting produces a fiberglass tape that is yellow in color.
 
 

Home ::  Electrical Products  ::  Aerospace Products  ::  Telecommunications Products   ::  Textile Products