HEAT SHRINKABLE POLYESTER Tape

Flat braided tape manufactured from high tenacity polyester yarn. This tape is designed for lacing the end turns of stators. Heat shrinkage of approximately 10% at 300° F holds windings tightly in place following bake cycle. Specifically formulated finish reduces fraying and improves knot holding characteristics. Applications to 155° C. Also available in low shrinkage version. (Less than 4% at 300° F) Add "LS" to end of part number for this item.  Covered by Breyden Products' UL tested sample BPCCT155.

Breyden Part Number	Strength (Minimum)	Width (Nominal)	Thickness (Nominal)	Standard Spool
500	600 lb.	.500"	.020"	250 ft.
350	450 lb.	.350"	.020"	250 yd.
200	110 lb.	.200"	.016"	250 yd.
100	75 lb.	.100"	.012"	250 yd.
75	50 lb.	.075"	.012"	500 yd.
60	35 lb.	.062"	.012"	500 yd.

HEAT SHRINKABLE POLYESTER Cord

Round twisted cord manufactured from high tenacity polyester yarn.  This cord is designed for use in high volume automatic stator lacing applications.  Heat shrinkage of approximately 10% at 300° F holds windings tightly in place following bake cycle.  Specifically formulated finish reduces fraying and improves knot holding characteristics.  Applications to 155° C.  Also available in low shrinkage version. (Less than 4% at 300° F) Add "LS" to the end of part number for this item.  Covered by Breyden Products' UL tested sample BPCCT155.

Breyden Part Number	Strength (Minimum)	Thickness (Nominal)	Standard Spool*	Approx. Yards Per Pound
252	40 lb.	.022"	2 lb.	1670
330	45 lb.	.026"	2 lb.	1280
390	70 lb.	.030"	2 lb.	1025
504	90 lb.	.040"	2 lb.	825
*Packages available to 12 lbs.

POLYESTER Dry Surge Ring Rope

Round braided rope manufactured from a special type of high tenacity polyester yarn.  This rope is designed for use in VPI (Vacuum Pressure Impregnation) systems.  The special yarn utilized increases varnish absorption.  A special high strength version is available with a high strength aramid fiber cord.  Applications to 155° F.  Covered by Breyden Products' UL tested sample BPCCT155.

Polyester Rope
Breyden Part Number	Nominal Diameter	Strength	Standard Spool
38P	3/8"	1400 lb.	100 ft.
58P	5/8"	2600 lb.	100 ft.
100P	1"	5000 lb.	100 ft.
Polyester with Aramid Core
38P	3/8"	1500 lb.	100 ft.
58P	5/8"	3400 lb.	100 ft.
100P	1"	5500 lb.	100 ft.

 

WAXED POLYESTER Cord

Round twisted cord manufactured from high tenacity polyester yarn.  Wax finish reduces fraying and improves knot-holding characteristics.  Applications to 155° C.

Breyden Part Number	Nominal Diameter	Strength	Standard Spool
P64	.035"	75 lb.	600 yd.
P96	.050"	90 lb.	400 yd.
P128	.060"	120 lb.	300 yd.

 

NOMEX® Cord

Round twisted cord manufactured from continuous filament Nomex® aramid yarn.  This cord is designed for use in lacing Class H electric motor stators.  Specifically formulated finish reduces fraying and improves knot holding characteristics.  Color: natural. Temperature: Applications to 220° C. Also available without finish.  Covered by Breyden Products' UL tested sample BPCCT180.

Breyden Part Number	Strength (Minimum)	Thickness (Nominal)	Standard Spool	Approx. Yards Per Pound
5311	105 lb.	.050"	1 lb.	400 yd.
5312	70 lb.	.050"	1 lb.	600 yd.
5313	35 lb.	.030"	1 lb.	1200 yd.

 

NOMEX® Tape

Flat braided tape manufactured from continuous filament Nomex® aramid yarn.  This tape was designed for lacing end turns of Class H electric motor stators.  Specially formulated finish reduces fraying and improves knot holding characteristics.  Color: natural.  Temperature: Applications to 220° C.  Also available without finish.  Covered by Breyden Products' UL tested sample BPCCT180.

Breyden Part Number	Strength (Minimum)	Width (Nominal)	Thickness (Nominal)	Standard Spool
5500	200 lb.	.500"	.028"	250 yd.
5200	85 lb.	.200"	.016"	250 yd.
5100	50 lb.	.110"	.014"	250 yd.
5170	35 lb.	.075"	.012"	250 yd.

 

POLYESTER/GLASS Tape

Flat braided tape manufactured from high tenacity polyester yarn combined with electrical grade, continuous filament Glass yarn.  This tape was designed for lacing end turns of electric motor stators.  Inclusion of high-temperature Glass provides protection from unanticipated temperature surges.  Color: natural.  Temperature: Applications to 155° C.  Also available without finish.

Breyden Part Number	Strength (Minimum)	Width (Nominal)	Thickness (Nominal)	Standard Spool
6500	200 lb.	.500	.030"	250 ft.
6300	150 lb.	.240"	.022"	250 yd.
6200	110 lb.	.210"	.022"	250 yd.
6100	75 lb.	.150"	.015"	250 yd.

 

WAXED Nylon Tape

Non-braided flat tape manufactured from high tenacity nylon yarn.  This material has a waxed finish for improved knot holding.  Covered by Breyden Products' UL tested sample BPCCT155.

Breyden Part Number	Strength (Minimum)	Width (Nominal)	Thickness (Nominal)	Standard Spool	Approx. Yards Per Pound
7MC*	200 lb.	.090"	.016"	1 lb.	575
5MC	150 lb.	.070"	.014"	1 lb.	700
3MC	110 lb.	.062"	.014"	1 lb.	850

 

FIBERGLASS DRY SURGE RING ROPE

Round, Untreated fiberglass surge rope. This material consists of glass fiber rovings encapsulated by a braided fiberglass sleeving. This surge rope is designed for dip or VPI ( vacuum pressure impregnation) systems. Untreated fiberglass surge rope provides for excellent varnish absorption.

Breyden Part Number	Size	Package
14F	1/4"	100'
38F	3/8"	100'
12F	1/2"	50'
58F	5/8"	50'
34F	3/4"	50'
1F	1"	50'